Find Out How to Assign a Static IP Using Windows 10 – 11

Find Out How to Assign a Static IP Using Windows 10 – 11

By camilaforero

Sometimes there are people who prefer to have a specific PC for their IP address, so that the router does not assign one automatically. This option is highly recommended as it is the best option to have much more security.

What is a Static IP Address?

Let’s first review what an IP address is, the first thing to note is that an IP is manually set to a permanent fixed address instead of being automatically assigned by your router using DHCP, which is Dynamic Host Configuration Protocol. This DHCP allows devices to connect to the network more easily, since IP addressing does not have to be configured for each new device.

Most of the time automatic addressing causes the IP to change, therefore many people choose to have a static IP for some devices, for example applications that can only connect to network devices using their IP address; among other situations with the devices you have at home, or the router.

Assign Static IP Addresses Using Your Router

First of all, before reviewing the IP assignment from a Windows 10 and 11 device, it is important to know that there is also a way in which you can assign a static IP from the router, since many routers allow you to assign a set of IP addresses. that are delivered to specific devices.

This option has some benefits that you might be interested in, such as the fact that the router still manages the IP addresses, which means that you won’t have to make changes to each individual device where you need the static IP; It’s also much easier to assign addresses within the same pool of IP addresses that are being used on your router. Therefore, if you want to try the option of assigning a static IP from your router, you can do it, also remember that a static IP can have many functions, including solving and avoiding connection problems with your Wi-Fi network and your devices.

How to Set a Static IP Address in Windows 10

Adding an IP address from your Windows 10 device is easy, just follow a few steps, starting in the Settings app and going deeper into Network and Internet, after this you will find the Properties for your network and the Edit button next to IP Assignment, where you can add your IP address.


  • Let’s see the steps in more detail, first you need to open the Settings app and look for the Network & Internet button there.
  • Then you can see the status of the network, which must be active, there you must find and click on Properties, then you must choose the network that you need to configure, since you can find in the menu all networks from Ethernet to Wi-Fi.
  • From the Properties you can find the “IP Configuration” option and there you must click the Edit button in the “IP Assignment” section.
  • You will then find a screen pop up, where you can change the “Edit IP Settings” dropdown menu to Manual, and then change the IPv4 switch to “Enabled”.
  • In the end you must save the process, and quite possibly the system must be restarted for all its applications to work correctly.

How to Set a Static IP Address in Windows 11

The process for assigning a static IP address from a Windows 11 device is just like the process for assigning the IP on a Windows 10 device. You need to locate Settings, go to Network & Internet and then find your network Properties, then just edit the information under IP Assignment and you can complete it manually.


  • You need to go into Settings first and then look for Network & Internet on the left side of the screen where you can see the current network connection.
  • Then click on “Properties” to review the network connections, these can be several and you must choose the network that you are going to configure depending on what you need, it can be Ethernet or Wi-Fi.
  • Then you should look for the “IP Assignment” section and click the Edit button.
  • Then you need to select “Manual” from the menu and toggle the IPv4 switch to “On”.
  • To finish you must save the process, and complete the details of your network.


In case you want to change the IP in more advanced networks, you may need to configure a static TCP/IP route, in order to reset the entire TCP/IP stack in Windows, and check for open TCP/IP ports, as well you need to find your MAC address in Windows or find your IP address from the command prompt to complete the whole process.

%d bloggers like this: